Mangrove Branch

This frame was made from a dead mangrove branch found near Port Canaveral, Fl.  The branch was cut in half to retain the irregular shape and the barnacles.  The wood & barnacles were coated with multiple coats of a clear acrylic resin to strengthen the wood and stabilize the barnacles.  The photo was taken at the locks of Port Canaveral, Fl.  The bird is a snowy egret.

 This Frame Has Been Sold

This frame is made from wood used for a paddock at a horse farm near Ocala, fl.  The profile on the outer edge of the wood was made by horses chewing the fence. The wood was cleaned, but no finish was applied, the inside edge has been milled with a router. 

Price does not include shipping.

Mirror is 18 inches by 53 inches

Frame is 30 inches by 66 inches by i inch thick

$300

THIS FRAME HAS BEEN SOLD

Yellow Weathered Moulding

This frame is made from remnants of an old cabinet I found in a trash pile at Port Canaveral, Fl. the wood was trim moulding on the cabinet, the finish was existing when I found it.  The frame is 18 by 8 inches and 3/4 inch thick, it has been fitted with a mirror.

 Dimensions are approximate

Center opening is 4 1/2 x 14 1/4 inches

Frame is 1 1/2 inches wide and 3/4 inches thick

$ 60

Price does not include shipping

Dew On Plants

This frame is made from remnants of a marine structure destroyed after the 2004 hurricanes in Fl.  I found the wood along the Banana river in Brevard county, Fl.  The wood is about 2 inches thick and 11 inches square.  The color and the beveled edges were existing.  The plant is an aquatic plant commonly called a pennywort.  The photo was taken during the early morning near Ocala, Fl.; the photo appears washed out because I took the photograph of the finished frame outside on a bright day.

Dimensions are approximate.

Photograph is about 7 inches each side.

Frame is about 11 1/2 inches each side and 2 inches thick.

Frame with this photograph $ 65

Frame with a mirror $ 65

Frame Only  $ 50

Prices do not include shipping.

                                                          

Scalloped Rectangle

This frame is made from wood from a marine dock that was destroyed in 2004 from hurricanes that passed through Fl.  The wood is 1 1/2 inches thick and the frame is 18 x 11 inches.  The arcs on the outer edge were existing resulting from where the wood planks were cut to fit around a structural pole.  The inside edge was milled with 1/4 inch round over router bit and a copper metallic finish was applied to the wood.  A mirror was fitted to the 4 inch square opening

Dimensions are approximate .

Center opening is 4 inches by 4 inches .

Frame is 10 1/2 inches wide by 13 inches high

and is 1 1/2 inches thick .

 $ 150

Price does not include shipping